Professor
Nach Vereinbarung
Generation of a 3D model of the inside volume of shoes for e-commerce applications using industrial x-ray computed tomography
In: Engineering Research Express vol. 3 pg. 045058.
Task-Specific Trajectory Optimisation for Twin-Robotic X-Ray Tomography
In: IEEE Transactions on Computational Imaging vol. 7 pg. 894-907.
X-ray imaging and computed tomography for engineering applications . Röntgenbildgebung und Computertomografie für technische Anwendungen
In: tm - Technisches Messen vol. 87 pg. 211-226.
Scanning trajectory optimisation using a quantitative Tuybased local quality estimation for robot-based X-ray computed tomography
In: Nondestructive Testing and Evaluation vol. (Published 21 June 2020) pg. 1-17.
DOI: 10.1080/10589759.2020.1774579
Edge-preserving compression of CT scans using wavelets
In: Insight - Non-Destructive Testing and Condition Monitoring (The British Institute of Non-Destructive Testing) vol. 62 pg. 345-351.
DOI: 10.1784/insi.2020.62.6.345
Calibration of cast-in Fibre-Bragg-Gratings for internal strain measurements in cast aluminium by using neutron diffraction
In: Measurement vol. 163 pg. 107939.
DOI: 10.1016/j.measurement.2020.107939
Evaluation of Strain Transition Properties between Cast-In Fibre Bragg Gratings and Cast Aluminium during Uniaxial Straining
In: Sensors vol. 20 pg. 6276.
DOI: 10.3390/s20216276
Computertomographie (CT) senkt Kosten bei der Retourenbearbeitung
In: Sensorik-Magazin des Clusters Sensorik Strategische Partnerschaft Sensorik e.V. vol. 99 pg. 3-5.
Evaluation of the impact of faulty scanning trajectories in robot-based x-ray computed tomography
In: Measurement Science and Technology vol. 32 pg. 015401.
Kleiner als ein Mikrometer: Entwicklung einer kompakten, hochauflösenden 3D-Röntgen-CT für die Materialanalyse
In: VDI-Z (Sonderteil Additive Fertigung) pg. 52 ff..
Reduktion von Metallartefakten durch multipositionale Datenfusion in der industriellen Röntgen-Computertomographie
In: tm - Technisches Messen vol. 87
Artifact reduction in X-ray computed tomography by multipositional data fusion using local image quality measures
Investigation of Non-circular Scanning Trajectories in Robot-based Industrial X-ray Computed Tomography of Multi-material Objects
Multi-Material Acceptance Testing for CT-Based Coordinate Measurement Systems
In: Proceedings of the 12th International Conference on Measurement and Quality Control. Cyber Physical Issue : IMEKO TC 14 2019 (Lecture Notes in Mechanical Engineering) pg. 131 ff..
Investigation of positioning accuracy of industrial robots for robotic-based X-ray computed tomography
Edge preserving compression of CT scans using wavelets
In: International Symposium on Structural Health Monitoring and Nondestructive Testing
Saarbrücken
Metal artifact reduction by fusion of CT scans from different positions using the unfiltered backprojection
In: 8th Conference on Industrial Computed Tomography (iCT 2018)
Wels, Österreich
Edge preserving compression of CT scans using wavelets
Metal artifact reduction by fusion of CT scans from different positions using the unfiltered backprojection
Dimensional Metrology for Industrial Computed Tomography
In: Handbook of X-ray Imaging - Physics and Technology. null (Series in medical physics and biomedical engineering) pg. 949-958.
Boca Raton, FL, USA
Fusion mehrerer Computertomographie-Aufnahmen zur Verbesserung der Bildqualität
pg. 29-32.
Untersuchungen zur Messunsicherheit und Wirtschaftlichkeit dimensioneller Computertomographie-Messungen an ausgewählten Beispielen
In: tm - Technisches Messen vol. 84 pg. 336-347.
Blick in belastete Composite-Bauteile
In: Konstruktion (Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe) pg. IW10-IW13.
Dimensionelles Messen mit Computertomographie
pg. 285-291.
Quantitative Untersuchung zur Reduzierung der Messzeit in der dimensionellen Computertomographie
In: Bavarian Journal of Applied Sciences vol. 3 pg. 282-296.
DOI: 10.25929/jy3v-pm72
Analysis and comparison of the surface filtering characteristics of computed tomography and tactile measurements
Determination of the mesio-distal tooth width via 3D imaging techniques with and without ionizing radiation: CBCT, MSCT, and μCT versus MRI
In: European Journal of Orthodontics vol. 39 pg. 310-319.
DOI: 10.1093/ejo/cjw047
Measurement accuracy in X-ray computed tomography metrology: Toward a systematic analysis of interference effects in tomographic imaging
In: Precision Engineering vol. 45 pg. 18-32.
DOI: 10.1016/j.precisioneng.2015.12.003
Bewertung technischer Oberflächen mit Röntgen-Computertomographie
In: Leitfaden zur Inspektion und Charakterisierung von Oberflächen mit Bildverarbeitung. null (Vision-Leitfaden)
Stuttgart
Analysis and comparison of the surface filtering characteristics of computed tomography and tactile measurements
In: 6th Conference on Industrial Computed Tomography (iCT 2016)
Wels, Österreich
Präzision in drei Freiheitsgraden - Exakte Bauteilpositionierung bei CT-Messungen ohne zusätzliche Antriebe
In: inspect
Dimensionelles Messen mit Computertomographie
In: Leitfaden zur industriellen Röntgentechnik. Zerstörungsfreie Prüfung mit Bildverarbeitung (Vision)
Messtechnik und Materialprüfung an belasteten Bauteilen mit In-situ-Computertomographie
In: Leitfaden zur industriellen Röntgentechnik. Zerstörungsfreie Prüfung mit Bildverarbeitung (Vision)
A reverse engineering methodology for nickel alloy turbine blades with internal features
In: CIRP Journal of Manufacturing Science and Technology vol. 9 pg. 116-124.
DOI: 10.1016/j.cirpj.2014.12.001
In-situ-Prüfungen von Kunststoff-Klebeverbindungen mit Computertomographie
In: KGK Rubber Point - Kautschuk Gummi Kunststoffe
Quantitative analysis of scaling error compensation methods in dimensional X-ray computed tomography
In: CIRP Journal of Manufacturing Science and Technology vol. 10 pg. 68-76.
DOI: 10.1016/j.cirpj.2015.04.004
Automatisierung von Mess- und Prüfprozessen mit Computertomographie
In: Leitfaden zur industriellen Röntgentechnik. Zerstörungsfreie Prüfung mit Bildverarbeitung (Vision)
Dimensionelles Messen und Materialprüfung an belasteten Bauteilen mit In-situ-CT
In: inspect vol. 15 pg. 54-56.
Measurement Uncertainty Evaluation in Dimensional X-ray Computed Tomography Using the Bootstrap Method
In: International Journal of Precision Engineering and Manufacturing vol. 15 pg. 617-622.
DOI: 10.1007/s12541-014-0379-9
Estimation of measurement uncertainties in X-ray computed tomography metrology using the substitution method
In: CIRP Journal of Manufacturing Science and Technology vol. 7 pg. 222-232.
DOI: 10.1016/j.cirpj.2014.04.002
New Method for Master Pattern Tool Correction Based on Computed Tomography Data and Intelligent Reverse Engineering
In: iCT Conference 2014 (Conference on Industrial Computed Tomography)
Wels, Österreich
Coefficient of Friction Measurements for Thermophastics and Fibre Composites Under Low Sliding Velocity and High Pressure
In: Tribology Letters vol. 51 pg. 191-198.
DOI: 10.1007/s11249-013-0107-0
Computed Tomography as a Tool for Tolerance Verification of Industrial Parts
In: Procedia CIRP vol. 10 pg. 125-132.
DOI: 10.1016/j.procir.2013.08.022
A study on evaluation strategies in Dimensional X-ray computed tomography by estimation of measurement uncertainties
In: International Journal of Metrology and Quality Engineering vol. 3 pg. 107-115.
New reference object for Metrological performance testing of industrial CT systems
Physical characterization and performance evaluation of an x-ray micro-computed tomography system for dimensional metrology applications
In: Measurement Science and Technology vol. 23 pg. 085404.
DOI: 10.1088/0957-0233/23/8/085404
Investigation on the influence of image quality in X-ray CT metrology
In: Conference on Industrial Computed Tomography (ICT)
Wels, Österreich
A computer simulation for the estimation of measurement uncertainties in dimensional X-ray computed tomography
In: Measurement pg. 2166-2182.
Coefficient of Friction Measurements for Thermoplastics and Fiber Composites under Low Sliding Velocity and High Pressure
Evaluation strategies in CT scanning
In: CT Conference
Kgs. Lyngby, Dänemark
A computer simulation platform for the estimation of measurement uncertainties in dimensional X-ray computed tomography
In: Measurement vol. 45 pg. 2166-2182.
DOI: 10.1016/j.measurement.2012.05.030
Systematic Errors in Dimensional X-ray Computed Tomography
In: Maletekniske Dage
Taastrup, Dänemark
Einfluss der Bildqualität röntgentomographischer Abbildungen auf Koordinatenmessungen . Grundlagen, Messungen und Simulationen
In: tm - Technisches Messen pg. 334-347.
CT scanning strategy - Prediction of image quality
In: Conference on Application of CT Scanning in Industry
Danish Technological Institute Taastrup, Dänemark
Investigation of measuring strategies in computed tomography
Simulation-Based Planning of Optimal Conditions for Industrial Computed Tomography
In: International Symposium on Digital Industrial Radiology and Computed Tomography
Berlin
Estimation of uncertainties in CT metrology by simulation
In: International Workshop on Computed Tomography for Dimensional Metrology
Università di Padova Padua, Italien
Dimensionelles Messen mit Helix-Computertomographie
pg. 12-14.
Seminar on industrial CT
Technical University of Denmark, Department of Mechanical Engineering Kgs. Lyngby, Dänemark
Comparison of Probing Error in Dimensional Measurement by Means of 3D Computed Tomography
Zum Verhältnis von Bildqualität und Messgenauigkeit in der CT-Metrologie
pg. 155-162.
Charakterisierung und Modellierung eines μCT-Systems
pg. 400-405.
Dimensionelles Messen mit Helix-Computertomographie
Reliability of Dimensional Measurements by Computed Tomography for Industrial Applications
Artefaktkorrekturen beim dimensionellen Messen mit industrieller Röntgen-Computertomographie
In: tm - Technisches Messen pg. 401-409.
Computed Tomography Metrology in Industrial Research and Development
In: MP - Materials Testing vol. 51 pg. 405-411.
DOI: 10.3139/120.110053
Vergleich von Fächerstrahl- und Kegelstrahl Computertomographie-Messungen am Beispiel eines Zylinderkopfsegmentes
Messunsicherheitsbetrachtungen in der industriellen Computertomographie (CT) mittels Simulation
Bestimmung des lokalen räumlichen Auflösungsvermögens eines industriellen Mikro-Computertomographie-Systems (μCT) mit Hilfe einer Modulationsübertragungsfunktion
pg. 507-520.
Computed Tomography - A new oppurtunity to measure complete volumes
Analyse von Einflussgrößen beim dimensionellen Messen mittels Röntgencomputertomographie
Modellierung und Messung von Kenn- und Einflussgrößen in der CT
pg. 137-152.
Koordinatenmessung mit industrieller Röntgen-Computertomografie
In: tm - Technisches Messen pg. 553-564.
DOI: 10.1524/teme.2007.74.11.553
Labor für Computertomographie