"This site requires JavaScript to work correctly"
Header minimieren

Prof. Dr. Sascha Kreiskott

  • Digitale Transformation
  • Energiewirtschaft
  • Dezentrale Erzeugung
  • IT Strategie

Fakultät European Campus Rottal-Inn

Professor:innen

Prodekan

Datenschutzbeauftragter THD

EC 2.06

0991/3615-8851

Bürozeiten

Nach Vereinbarung

Sortierung:
Zeitschriftenartikel

  • Helana Lutfi
  • Rui Li
  • Thomas Spittler
  • Sascha Kreiskott
  • Katerina Volchek

Increasing Efficiency in Virtual Teaching in an International Context: E-learning and Instructional Approaches at ECRI

In: Bavarian Journal of Applied Sciences pg. 211-225.

  • (2022)

DOI: 10.25929/bjas202291

  • European Campus Rottal-Inn
  • DIGITAL
Zeitschriftenartikel

  • M. Handschuh
  • S. Detscher
  • Sascha Kreiskott
  • A. Theodoridis
  • C. Glöckner

Mit AAA-Vertrieb innovative Energielösungen verkaufen

In: Sales Excellence vol. 27 pg. 16-19.

  • (2018)

DOI: 10.1007/s35141-018-0178-5

Neue Ansätze sind nötig, um den Verkauf innovativer Energielösungen zu beschleunigen und zu vereinfachen. Bereits heute stehen vielfältige leistungsstarke Anwendungen basierend auf Analytik, Automatisierung und Artifizieller Intelligenz (AAA) bereit. Die Weichen für zukünftige Markterfolge werden jetzt gestellt. ...
  • Angewandte Naturwissenschaften und Wirtschaftsingenieurwesen
  • European Campus Rottal-Inn
  • NACHHALTIG
Beitrag in Sammelwerk/Tagungsband

  • Sascha Kreiskott
  • C. Lau

Strategische Herausforderungen im Energievertrieb

pg. S. 99 – 111.

Springer Fachmedien Wiesbaden GmbH Wiesbaden

  • (2015)
Die Vertriebe im Energiemarkt Deutschlands stehen vor gro⇓en Herausforderungen. Bei steigenden Kosten für die Verbraucher und die Energieversorgung geht die Ertragssituation der Vertriebe aufgrund verschiedener Effekte zurück. Die gestiegenen Kosten befeuern den Wettbewerb, was Kunden aus der profitablen Grundversorgung in kaum profitable Akquiseprodukte treibt. Durch abnehmende Mengen bei abnehmenden Margen entsteht eine Situation, in der Energieversorger über Adjustierungen ihres Geschäftsmodells nachdenken müssen. Den Vertrieben verbleibt eine Reihe von strategischen Optionen, um sich den veränderten Marktbedingungen anzupassen und der sich abzeichnenden Abwärtsspirale zu entziehen: Digitalisierung, werthaltige Akquise, neue Geschäftsmöglichkeiten rund um Heimsteuerung, Sicherheits- und Komfortdienstleistungen sowie möglicher Vertriebsnutzen aus Big Data werden näher untersucht. Nicht zuletzt bietet die Energiewende weitere Geschäftspotenziale durch Vertrieb und Optimierung von regenerativer Erzeugung.
  • Angewandte Naturwissenschaften und Wirtschaftsingenieurwesen
  • European Campus Rottal-Inn
  • NACHHALTIG
Zeitschriftenartikel

  • T. Holesinger
  • Jia, Q. X.
  • P. Dowden
  • Sascha Kreiskott
  • Maiorov, B.
  • L. Civale
  • B. Gibbons

Ultra-fine multilayers of complex metal-oxide films

In: Advanced Materials vol. 19 pg. 1917.

  • (2007)

DOI: 10.1002/adma.200602743

Thick films containing ultrafine multilayer structures of two complex metal oxides are grown with a single, sectored target in conjunction with pulsed laser deposition on stationary or moving templates. This process is demonstrated with the high‐temperature superconductors YBa2Cu3Oy and EuBa2Cu3Oy. Multilayer periodicities (see figure) as low as 5.5 nm (approximately five unit cells) are obtained in thick films (1.84 μm ≈ 335 bilayer pairs) with improved superconducting properties.
  • European Campus Rottal-Inn
  • Angewandte Naturwissenschaften und Wirtschaftsingenieurwesen
  • NACHHALTIG
Beitrag in Sammelwerk/Tagungsband

  • T. Holesinger
  • B. Gibbons
  • S. Foltyn
  • P. Arendt
  • V. Matias
  • Jia, Q. X.
  • L. Stan
  • Sascha Kreiskott
  • J. Coulter
  • R. DePaula
  • Feenstra, R.
  • Gapud, A. A.
  • Specht, E. D.
  • Kodenkandath, T.
  • Zhang, W.

TEM studies of interfacial microstructures in YBa2Cu3O7 coated conductors

vol. 2003-31 pg. 111.

  • (2006)
  • European Campus Rottal-Inn
  • Angewandte Naturwissenschaften und Wirtschaftsingenieurwesen
  • NACHHALTIG
Zeitschriftenartikel

  • Maiorov, B.
  • B. Gibbons
  • Sascha Kreiskott
  • V. Matias
  • Jia, Q. X.
  • T. Holesinger
  • L. Civale

Influence of tilted geometries on the critical current in superconducting thin films

In: IEEE Transactions on Appiled Superconductivity vol. 15 pg. 2582-2585.

  • (2005)

    ISSN: 1051-8223

  • European Campus Rottal-Inn
  • Angewandte Naturwissenschaften und Wirtschaftsingenieurwesen
  • NACHHALTIG
Zeitschriftenartikel

  • Alp Findikoglu
  • Sascha Kreiskott
  • Riele
  • P. te Riele
  • V. Matias

Role of beam divergence and ion-to-molecule flux ratio in ion-beam-assisted deposition texturing of MgO

In: Journal of Materials Research vol. 19 pg. 501-504.

  • (2004)

    ISSN: 0884-2914

DOI: 10.1557/jmr.2004.19.2.501

The effect of process conditions on the biaxial texture of MgO films grown by ion-beam-assisted deposition (IBAD) was studied. The texture showed a strong dependence on the Ar+/MgO flux ratio, but a weak dependence on the divergence of Ar+ beam. One hundred-nanometer-thick epi-MgO on less than 10-nm-thick textured IBAD-MgO films that were grown on 7-nm-thick Y2O3 layers on fused silica, metal alloy tape, and polished Si substrates showed biaxial texture with in- and out-of-plane orientation distributions of less than 4° and 2°, respectively. These results strengthen the notion that the IBAD technique could serve as a universal technological process to integrate amorphous and polycrystalline substrates with various oxide and semiconductor films that need to be grown with good biaxial texture.
  • Angewandte Naturwissenschaften und Wirtschaftsingenieurwesen
  • European Campus Rottal-Inn
  • NACHHALTIG
Zeitschriftenartikel

  • P. Arendt
  • S. Foltyn
  • L. Civale
  • R. DePaula
  • P. Dowden
  • J. Groves
  • T. Holesinger
  • Jia, Q. X.
  • Sascha Kreiskott
  • L. Stan
  • I. Usov
  • H. Wang
  • J. Coulter

High critical current YBCO coated conductors based on IBAD MgO

In: Physica C: Superconductivity vol. 412-414 pg. 795-800.

  • (2004)

    ISSN: 09214534

DOI: 10.1016/j.physc.2003.12.074

This report describes recent developments of second-generation Y1Ba2Cu3O7−δ (YBCO) coated conductors deposited on biaxially textured MgO templates. The materials system architecture implemented to achieve high critical currents in YBCO films is described. The average full-width at half maximum (FWHM) in-plane texture obtained for MgO films processed on meter-length tapes is 7°, while that for the YBCO films is 3°. The best YBCO in-plane values approach 2° and the out-of-plane values approach 1°. Critical currents (1 cm wide tapes, 75 K, self field) have attained 423 A for 7 cm length and 233 A for 50 cm length tapes.
  • European Campus Rottal-Inn
  • Angewandte Naturwissenschaften und Wirtschaftsingenieurwesen
  • NACHHALTIG
Zeitschriftenartikel

  • Sascha Kreiskott
  • P. Arendt
  • J. Coulter
  • P. Dowden
  • S. Foltyn
  • B. Gibbons
  • V. Matias
  • C. Sheehan

Reel-to-reel preparation of ion-beam assisted deposition (IBAD)-MgO based coated conductors

In: Superconductor Science and Technology vol. 17 pg. S132-S134.

  • (2004)

    ISSN: 0953-2048

DOI: 10.1088/0953-2048/17/5/008

We report on our efforts in developing and scaling-up the systems for IBAD-MgO based coated conductor fabrication. The overall fabrication process involves a number of different processes including: electropolishing of the substrates; barrier-layer, seed-layer, and IBAD-MgO deposition by e-beam evaporation; and pulsed laser deposition of buffer and YBCO layers. All processes are realized in reel-to-reel processing systems. Latest results have shown that the IBAD-MgO approach yields coated conductor performance comparable to the best results achieved elsewhere to date.
  • European Campus Rottal-Inn
  • Angewandte Naturwissenschaften und Wirtschaftsingenieurwesen
  • NACHHALTIG
Beitrag in Sammelwerk/Tagungsband

  • B. Gibbons
  • Sascha Kreiskott
  • V. Matias
  • T. Holesinger
  • J. Coulter

Continuous preparation of PLD oxide buffer layers andYBCO for coated conductor applications

pg. 9.

  • (2004)
  • Angewandte Naturwissenschaften und Wirtschaftsingenieurwesen
  • European Campus Rottal-Inn
  • NACHHALTIG
Zeitschriftenartikel

  • Polak, M.
  • Krempasky, L.
  • Demencik, E.
  • Wehler, D.
  • Sascha Kreiskott
  • B. Mönter
  • Polyanskii, A.
  • Larbalestier, D.C.
  • B. Moenter

Critical currents of narrow YBCO rings on ni and LaAlO/sub 3/ substrates

In: IEEE Transactions on Appiled Superconductivity vol. 13 pg. 2595-2598.

  • (2003)

    ISSN: 1051-8223

DOI: 10.1109/TASC.2003.811857

Low loss YBCO based flexible conductors for AC operation must have a filamentary structure with filament width below 0.1 mm. MO images of structured YBCO films showed that the flux penetration is less homogeneous in YBCO filaments on Ni substrates than that in filaments on LaAlO, which indicates that the patterning may affect the critical current density in narrow filaments. To see the effect of patterning on the filament critical current we studied I-V curves and critical currents of YBCO rings with various widths ranging from 0.3 mm down to 0.02 mm. The rings were prepared by a standard lithographic process. To avoid problems with current contacts, the current in the rings was induced by external magnetic field and electric field-current characteristics were determined by a Hall probe method.
  • European Campus Rottal-Inn
  • Angewandte Naturwissenschaften und Wirtschaftsingenieurwesen
  • NACHHALTIG
Zeitschriftenartikel

  • S. Foltyn
  • P. Arendt
  • Jia, Q. X.
  • H. Wang
  • MacManus-Driscoll, J. L.
  • Sascha Kreiskott
  • R. DePaula
  • L. Stan
  • J. Groves
  • P. Dowden

Strongly coupled critical current density values achieved in Y1Ba2Cu3O7−δ coated conductors with near-single-crystal texture

In: Applied Physics Letters vol. 82 pg. 4519-4521.

  • (2003)

    ISSN: 0003-6951

DOI: 10.1063/1.1584783

One of the most intensely researched subjects in the development of YBa2Cu3O7−δ (YBCO)-based coated conductors is the methodology for achieving ever-sharper film texture on flexible metal substrates. This is a critical issue due to the intrinsic weak-link behavior that results in depressed critical current density (Jc) in polycrystalline YBCO. Using ion-beam-assisted deposition of magnesium oxide, we have achieved YBCO texture on superalloy substrates approaching that on single-crystal oxide substrates. This advance has allowed us to fabricate coated conductor samples with Jcs that are as high as for films on oxide crystals; for example, >2 MA/cm2 (75 K, self-field) at a YBCO thickness of ∼1.5 μm.
  • European Campus Rottal-Inn
  • Angewandte Naturwissenschaften und Wirtschaftsingenieurwesen
  • NACHHALTIG
Zeitschriftenartikel

  • B. Moenter
  • M. Getta
  • Sascha Kreiskott
  • H. Piel
  • N. Pupeter
  • Pouryamout, J.

High J/sub C/ YBCO films on biaxially textured Ni with oxide buffer layers deposited using evaporation and sputtering techniques

In: IEEE Transactions on Appiled Superconductivity vol. 13 pg. 2543-2546.

  • (2003)

    ISSN: 1051-8223

DOI: 10.1109/TASC.2003.811843

Epitaxial buffer layers of CeO/sub 2/ and Yttria-stabilized ZrO/sub 2/ (YSZ) have been deposited on biaxially textured nickel substrates using thermal reactive evaporation, electron beam evaporation and rf sputtering. The buffer layers were characterized by XRD, SEM and optical microscopy. YBCO films were deposited by high-pressure dc sputtering on CeO/sub 2//YSZ/CeO/sub 2/ buffered substrates and the resulting superconducting properties were measured inductively. On exclusively evaporated buffer architectures critical current densities of 0.6 MA/cm/sup 2/ (77 K, H = 0 T) were measured. The buffers showed some cracks after YBCO deposition, which we considered to be responsible for the relatively low J/sub c/. Buffer architectures with evaporated CeO/sub 2/ followed by rf sputtering of YSZ and CeO/sub 2/ in oxygen atmosphere remained completely crack free after YBCO deposition. Critical current densities between 1.5 and 2.3 MA/cm/sup 2/ (77 K, H = 0 T) in 460 nm thick YBCO films were obtained reproducibly. The critical temperatures T/sub c/ ranged between 88 and 92 K and the typical width /spl Delta/T/sub c/ of the transition was 1.5 K.
  • European Campus Rottal-Inn
  • Angewandte Naturwissenschaften und Wirtschaftsingenieurwesen
  • NACHHALTIG
Zeitschriftenartikel

  • B. Gibbons
  • Alp Findikoglu
  • Sascha Kreiskott
  • L. Bronisz
  • Peterson, D.
  • V. Matias

Accelerated coated conductor program at Los Alamos national laboratory

In: IEEE Transactions on Appiled Superconductivity vol. 13 pg. 2488-2491.

  • (2003)

    ISSN: 1051-8223

DOI: 10.1109/TASC.2003.811828

In order to accelerate research and development of coated conductors (CC), a new facility has been developed at Los Alamos National Laboratory (LANL) with labs dedicated to scaled-up fabrication and characterization of CC. These laboratories include facilities for metal tape preparation, ion-beam assisted deposition (IBAD) of template layers, superconductor deposition by laser ablation (PLD), as well as materials characterization including low-temperature transport measurements. The work builds on the prior successes of the LANL CC program, such as the benchmark results of critical currents over 300 A on 1-cm-wide short samples deposited via IBAD and PLD. The new labs have recently been completed and include the ability for reel-to-reel tape processing and characterization. Fabrication of long lengths of tape (>10 m) allow for high-throughput experimentation by linear combinatorial design. This facility is also made to enable collaboration with industrial and other partners.
  • European Campus Rottal-Inn
  • Angewandte Naturwissenschaften und Wirtschaftsingenieurwesen
  • NACHHALTIG
Zeitschriftenartikel

  • Sascha Kreiskott
  • M. Getta
  • B. Mönter
  • H. Piel
  • N. Pupeter

High JC YBCO films on biaxially textured Ni with oxide buffer layers deposited using evaporation and sputtering techniques

In: Physica C: Superconductivity vol. 383 pg. 306-314.

  • (2003)

    ISSN: 09214534

DOI: 10.1016/S0921-4534(02)01986-X

Epitaxial buffer layers of CeO2 and yttria-stabilised ZrO2 (YSZ) have been deposited on biaxially textured nickel substrates using evaporation and rf sputtering. The buffer layers were characterised by XRD, SEM and optical microscopy. YBa2Cu3O7−δ (YBCO) films were deposited by high pressure dc sputtering on CeO2/YSZ/CeO2 buffered substrates and the resulting superconducting properties were measured inductively. On exclusively evaporated buffers critical current densities of up to 0.6 MA/cm2 (77.3 K, H=0 T) were achieved. The buffer layers showed some cracks after YBCO deposition, which we considered to be responsible for the relatively low JC. In contrast buffer architectures with evaporated CeO2 followed by rf sputtering of YSZ and CeO2 remained completely free of cracks after YBCO deposition. Critical current densities between 1.5 and 2.6 MA/cm2 (77 K, H=0 T) in 400 nm thick YBCO films were obtained reproducibly. The critical temperatures TC ranged between 87 and 92 K and the typical width ΔTC of the transition was 1.5 K.
  • Angewandte Naturwissenschaften und Wirtschaftsingenieurwesen
  • European Campus Rottal-Inn
  • NACHHALTIG
Patentschrift

  • Sascha Kreiskott
  • V. Matias
  • P. Arendt
  • S. Foltyn
  • L. Bronisz

High current density electropolishing in the preparation of highly smooth substrate tapes for coated conductors

  • 21.07.2003 (2003)
  • Angewandte Naturwissenschaften und Wirtschaftsingenieurwesen
  • European Campus Rottal-Inn
  • NACHHALTIG
Zeitschriftenartikel

  • Sascha Kreiskott
  • P. Arendt
  • L. Bronisz
  • S. Foltyn
  • V. Matias

Continuous electropolishing of Hastelloy substrates for ion-beam assisted deposition of MgO

In: Superconductor Science and Technology vol. 16 pg. 613-616.

  • (2003)

    ISSN: 0953-2048

DOI: 10.1088/0953-2048/16/5/312

We demonstrate the applicability of continuous electropolishing for the preparation of metal tapes for ion-beam assisted deposition of MgO for the fabrication of in-plane textured template layers. These templates are used for the fabrication of second generation high temperature superconducting wires utilizing YBa2Cu3O7−δ coatings on metallic substrates. Surface roughness values below 1 nm and local slopes of less than 1° could be achieved with the electropolishing process. Mean surface roughness values are lower with the use of electropolishing and slopes of surface roughness inclines are significantly reduced compared to the best results of mechanical polishing (3.5 nm and 5°, respectively). The cost-effective process of electropolishing shows great promise for the fabrication of second generation high temperature superconducting wire.
  • Angewandte Naturwissenschaften und Wirtschaftsingenieurwesen
  • European Campus Rottal-Inn
  • NACHHALTIG
Beitrag in Sammelwerk/Tagungsband

  • M. Getta
  • Sascha Kreiskott
  • B. Moenter
  • H. Piel
  • Pouryamout, J.
  • Wehler, D.

RABiTS YBCO-Bandleiter . Teilvorhaben: YBCO-beschichtete Metallbänder für die Magnet- und Energietechnik

pg. 1-72.

  • (2003)
  • European Campus Rottal-Inn
  • Angewandte Naturwissenschaften und Wirtschaftsingenieurwesen
  • NACHHALTIG
Zeitschriftenartikel

  • Hein, M.A.
  • M. Getta
  • Sascha Kreiskott
  • B. Mönter
  • H. Piel
  • Oates, D.E.
  • Hirst, P.J.
  • Humphreys, R.G.
  • Lee, H.N.
  • Moon, S.H.
  • R.G Humphreys

Recent developments in the characterization of superconducting films by microwaves

In: Physica C: Superconductivity vol. 372-376, Part 1 pg. 571-577.

  • (2002)

    ISSN: 09214534

DOI: 10.1016/S0921-4534(02)00797-9

We describe and analyze selected surface impedance data recently obtained by different groups on cuprate, ruthenate and diboride superconducting films on metallic and dielectric substrates for fundamental studies and microwave applications. The discussion includes a first review of microwave data on MgB2, the weak-link behaviour of RABiTS-type YBa2Cu3O7−δ tapes, and the observation of a strong anomalous power-dependence of the microwave losses in MgO at low temperatures. We demonstrate how microwave measurements can be used to investigate electronic, magnetic, and dielectric dissipation and relaxation in the films and substrates. The impact of such studies reaches from the extraction of microscopic information to the engineering of materials and further on to applications in power systems and communication technology.
  • European Campus Rottal-Inn
  • Angewandte Naturwissenschaften und Wirtschaftsingenieurwesen
  • NACHHALTIG
Hochschulschrift

  • Sascha Kreiskott

Supraleitende YBa2Cu3O7-δδ-Schichten auf metallischen Bändern

Fachbereich Physik Wuppertal

  • November 2001 (2001)

For the use of high-temperature superconducting materials in energy technology flexiblewires or tapes are needed. Up to now two different routes for their fabrication do exist.Primary there is the powder in tube process, which uses polycrystalline BSCCO powder in asilver tube. Secondary there are the coated conductor concepts, which use a metallic tape as asubstrate for the deposition of buffer and superconducting layers. In order to achieve highcritical current densities biaxially textured layers of the superconductor YBCO are necessary.As a consequence either the substrates (RABiTS: rolling assisted biaxially textured substratesapproach) or the deposited buffers (IBAD: ion beam assisted deposition approach) have to betextured. In this thesis the RABiTS approach was used to produce short samples ofsuperconducting tapes.One of the most important aspects of the RABiTS technique is the deposition of buffer layers,which serve as a chemical barrier between the ferromagnetic Nickel substrate and match thestructural properties of the substrate tape and the YBCO layer. In order to deposit high qualityYBCO films on textured Nickel substrates highly (100) textured and crack free buffer layersare needed. Only few materials such as CeO2 and Yttria-stabilised Zirconia (YSZ) are suitedfor the use as a buffer layer. In this thesis several deposition techniques such as rf sputtering,thermal reactive evaporation and electron beam evaporation were developed and tested for thedeposition of CeO2 and YSZ. The buffer layers were characterised by XRD, SEM and opticalmicroscopy. The growth behaviour of CeO2 on Nickel was studied in detail to ensure (100)oriented growth on the cube textured Nickel substrate. Growth conditions for the reproducibledeposition of (100) oriented buffer layers could be found.YBCO films were deposited by dc-sputtering on the buffer layers and the resultingsuperconducting properties were measured by inductive characterisation and transport currentmeasurements. The cracking of the buffer layers during the highly oxidising conditions of theYBCO deposition process turned out to be the main obstacle to achieving goodsuperconducting properties. After optimisation critical current densities up to 0.6 MA/cm2(77 K, 0 T) and critical temperatures of 91 K with transition widths of 3 K could be obtainedin 400 nm thick YBCO films on exclusively evaporated CeO2/YSZ/CeO2 buffer architectures.These layers still showed cracks after the YBCO deposition, which seemed to be the cause forthe low critical current densities. Buffer architectures with evaporated CeO2 followed bysputtering of YSZ and CeO2 remained crack free after the YBCO deposition. Critical currentdensities between 1.5 and 2.6 MA/cm2 (77 K, 0 T) in 400 nm thick films could be achievedreproducibly. The transition temperatures were measured to be between 91 and 92 K withtransition widths of 1.5 K.
  • Angewandte Naturwissenschaften und Wirtschaftsingenieurwesen
  • European Campus Rottal-Inn
  • NACHHALTIG